County F.A. Shirt Badge Self-Iron Instructions

  1. Set iron temperature to 2 dots (150°c).
  2. Place shirt on flat hard surface (table or worktop).
  3. Place badge on left breast pocket and smooth out shirt.
  4. Cover badge with towel or cloth garment, making sure badge
    does not move.
  5. Press iron down hard on badge for 20-30 seconds and gently
    move iron around in circular motion.
  6. Leave to cool for 2-3 minutes.
  7. Peel off cover film from corner smoothly and at a sharp angle.
  8. Place film that has been removed over badge and repeat.
    steps 1-5.
  9. Leave shirt/badge to cool down before folding.

Download a copy of these instructions (pdf) 

Back to blog